Cooling masterbatch

Mainly used for PP, the temperature can be reduced by 30-50 degrees.

Brightening masterbatch

Brightening masterbatch is also called bright masterbatch, the purpose is to improve the brightness of the product, its main brightener is ethylene bis-stearamide, the general color masterbatch is 20%-30%, and the product is 0.2%-0.3% , Too much will affect the printing effect of the product.

During the production of the reinforced masterbatch, sometimes the material is easy to accumulate in the discharge opening, which is mainly caused by the air entrained by the talc powder. During the production, it should be heated and stirred to melt the wax, wet and lubricate the stone powder or add white mineral oil.

Hygroscopic defoaming masterbatch

The moisture absorption and defoaming masterbatch can mainly remove the water content and unknown low-molecular volatiles in the plastic, so that the plastic product has no water splash and no bubbles, so that the drying process can be reduced while ensuring the quality of the product.

Flame retardant masterbatch

Flame retardant masterbatch is mainly used for flame retardant modification occasions,

Foaming masterbatch

Foaming masterbatch is often used in PE, PP, EVA, etc.