Functional masterbatch refers to the concentration of various plastic additives, the direct addition of additives is not easy to disperse, the use of efficiency is not high, and thus often added in the form of masterbatch.

Functional masterbatch hardness: too high hardness of the powder particles - ceramic powder, inorganic antibacterial agents, quartz sand, etc. will cause serious wear and tear on the surface of the equipment, not only reduce the service life of the equipment, and make the mixture color dark, Serious black when serious.
Function Masterbatch Type:
Cooling masterbatch
Mainly used for PP can be reduced temperature of 30-50 degrees.
Brightening masterbatch
Brightening masterbatch is also called bright masterbatch, the purpose is to improve the brightness of products, the main brightener with ethylene bis-stearic acid amide, the general color masterbatch 20% -30%, 0.2% -0.3% , Too much will affect the printing effect of the product.
Enhanced Masterbatch In production, sometimes the material is easy to accumulate the discharge port, which is mainly due to talc powder entrained with air, the production should be heated to stir, so wax melting, wet talc or white mineral oil.
Moisturizing and defoaming masterbatch
Moisturizing and defoaming masterbatch is mainly able to remove the moisture contained in the plastic and unknown low molecular volatiles, so that plastic products without water no bubbles, so that in ensuring the quality of products can be reduced while drying process.
Flame retardant masterbatch
Flame retardant masterbatch is mainly used for flame retardant modification occasions,
Foam Masterbatch
Foam masterbatch commonly used in PE, PP, EVA and so on.